Fraud Blocker CareSens N Blood Glucose Test Strips 100pk – Diabetes Shop Skip to content

Buy 1 pair of circulation socks, get the 2nd pair 50% off

Product details

The CareSens N Blood Glucose Test Strips can be used with the CareSens N, CareSens N POP and CareSens N Premier monitors. These strips don’t require coding, just insert the strip into the monitor and it is ready to use. CareSens N test strips come in a pack of 100.

The CareSens N test strips are compatible with:

Note: The test strip must be inserted into your monitor before applying blood to the pointed end. The monitor does not require any manual coding. The monitor will switch off if the blood sample is not applied within 2 minutes of inserting the test strip into the monitor.

Always read the label and follow the directions for use.

Frequently asked questions

I am eligible for the NDSS product subsidy. Can I purchase these test strips at the NDSS subsidised price?

No, as Diabetes Shop is not an NDSS Access Point, these test strips are available to purchase at full retail price, without any NDSS subsidy.

To access NDSS subsidised products, you will need to visit your local NDSS Access Point. If you are eligible for the NDSS subsidy and have purchased full-priced products from Diabetes Shop, you are not able to claim any rebate.

How to use - Step 1: Preparing the lancing device

  1. Unscrew and remove the adjustable tip.
  2. Insert a new disposable lancet firmly into the carrier.
  3. Twist off and set aside the protective cover of the disposable lancet and replace the adjustable tip.
  4. Set the depth of penetration that you want to use; in thicker skin areas use a higher number; in thin sensitive skin areas use a lower number. Rotate the top portion of the adjustable tip until the setting number matches the arrow.
  5. Cock the lancing device by pulling on the sleeve until the device clicks.

How to use - Step 2: Preparing the meter and test strip

  1. Wash your hands and the site from which the blood will be drawn.
  2. Gently insert the square end of the test strip into the meter port with its contact bars facing upwards. The (strip with blood drop) symbol should appear on the screen.
  3. Get a blood sample using your lancing device (see instructions above).
  4. Touch the pointed tip of the strip into the blood droplet on your finger, keeping the test strip vertical to the blood droplet, making sure the blood fills up the small window on the black side of the strip. Note: You only need about 0.5μl of blood (about the size of a pinhead).
  5. Once the blood sample has filled the confirmation window, the meter will beep. If the blood sample has insufficient volume, an error message will appear.
  6. The test result will appear after the meter counts down from 5 to 1. The result will automatically be stored in the meter’s memory.

YOUnited Membership

Diabetes YOUnited is more than just a membership – it’s Your Community. Your Connection. Your Journey.

Join now

Free shipping

Free shipping on all orders, with no minimum spend

Birthday gift

Receive a voucher to spend at the Diabetes Shop on your birthday

Diabetes Connect

Your online member community with discussion forums

Healthy resources

Including meal plans, cooking videos and online health coaching!